Views: 13 Author: Site Editor Publish Time: 2020-05-05 Origin: Site
1. Introduction
This machine is mainly used for automatic forming of flat masks. After the entire roll of fabric is unrolled, it is driven by rollers, and the fabric is automatically folded and wrapped. Nose bridge rolls unrolled by traction. Cut and import into the hemmed fabric, both sides are welded to seal by ultrasonic welding, and then through the ultrasonic side seal. It is cut and shaped by a cutter; transported to the two mask ear band welding stations through an assembly line. The final mask is formed by ultrasonic welding. After the mask is made, it is transported to flat belt line and collected.
2. Technical Parameters
Size | 5000mm(L)×3500mm(W)×1800mm(H) |
Mask specification | 175*95mm |
Production efficiency | 100-120PCS/min |
Qualification rate | 98-99% |
Failure rate | 2% |
Weight | ≤2100kg, ground load bearing > 300kg |
Working power | 220VAC ± 5%, 50z, rated power about 6.5-8.5KW |
Compressed air | 0.5 ~ 0.7MPa, the use flow rate is about 300L / min |
Operating environment | temperature 10 ~ 35 ℃, humidity 5-35% HR, no flammable and corrosive gas, no dust (cleanness not less than 100,000). |
3. Equipment Components
NO. | Part name | Quantity | Remarks |
1 | Water filter cloth / filter cotton / water absorption layer unwinding | 3 sets | Up to 4 sets, random 3 sets |
2 | Nose bridge strip unwinding mechanism | 1 set | |
3 | Nose bridge straightening mechanism | 1 set | Width 3-7mm |
4 | Nose bridge strip driving and cutting mechanism | 1 set | Width 3-7mm |
5 | Fabric hemming mechanism | 1 set | |
6 | Roll welding edge sealing mechanism | 1 set | Both sides |
7 | Cloth driving mechanism | 1 set | |
8 | Cloth fan folding mechanism | 1 set | |
9 | Side Seam Roll welding mechanism | 1 set | |
10 | Roll-sealing mechanism | 1 set | |
11 | Shunting mechanism (slicing machine) | 1 set | Suitable for fully automatic face mask machine |
12 | Ear band welding machine mechanism | 1 set | laminated |
13 | Blanking line (laminated line) | 2 | Suitable for fully automatic face mask machine |
14 | Operation Panel | 1 set |
4. Suitable material specifications
Item | Number of hanging shafts | Width (mm) | Coil outer diameter (mm) | Inner diameter of barrel (mm) | Weight |
Non-woven Melt-blow cloth | 3 | 170~200 | Φ600 | Φ76.2 | Max 15kg |
Bridge of nose Steel wire covered plastic / pure steel | 1 | 3月7日 | Φ400 | Φ76.2 | Max 25kg |
Ear belt | 2 bags | 160*3 | - | - | 10N |
5. Finished Samples:
content is empty!