Views: 14 Author: Site Editor Publish Time: 2020-05-05 Origin: Site
1. Introduction:
This machine is mainly used for automatic N95 masks. The working process of N95 Mask Machines are as follows: the multi-layer non-woven fabric rolls are subjected to compound roll welding after feeding. Nasal lines are welded after unwinding and cutting. Two rolls of ear loops are welded after automatically unwinding and cutting to fixed length. Then masks are folded in half. After ultrasonic welding and fusion, the masks are rolling-cut and formed.
2.Technical Parameters:
Size | About 7200mm(L)×1500mm(W)×2000mm(H) |
Mask specification | 150×220mm |
Production efficiency | 50-60PCS/min |
Qualification rate | 98-99% |
Failure rate | 2% |
Weight | ≤5000kg, ground load bearing <500KG/m2 |
Working power | 3800VAC ± 5%, 50z, rated power about 15KW |
Compressed air | 0.6-0.8MPa, the use flow rate is about 300L / min |
Operating environment | temperature 10 ~ 35 ℃, humidity 5-35% HR, no flammable and corrosive gas, no dust (cleanness not less than 100,000). |
3.Equipment Components
NO. | Part name | Quantity | Remarks |
1 | Materials feeding rack | 1set | |
2 | Cut and insert nasal line | 1set | |
3 | Pattern welding | 1set | |
4 | Ear loop feeding and welding | 1set | |
5 | Forming welding | 1set | |
6 | Cut waste | 1set | |
7 | Ear band welding machine mechanism | 1set | |
8 | Finished Mask unloading conveyor | 1set |
4.Suitable material specifications:
Item | Number of hanging shafts | Width (mm) | Coil outer diameter (mm) | Inner diameter of barrel (mm) | Weight |
Non-woven Melt-blow cloth | 3月4日 | 270 | Φ600 | Φ76.2 | Max 15kg |
Bridge of nose Steel wire covered plastic / pure steel wire / full plastic | 1 | 5 | - | - | - |
Ear belt | 2 bags | 4月5日 | - | - | - |
5.Finished Samples:
content is empty!